IndustrialWaterChiller.com
> Water Chillers > 2, 3, 4, 5
Ton Chillers
2, 3, 4, 5 Ton Chillers
(Air Cooled)
Need another
size?
Need to figure
out what size you need?
Do you know why
you should have a chiller if you are resistance welding?
-
Features:
-
The unit is rated at the American
Refrigeration Institute's National Standard of 95 degree F ambient and
44 degree F chilled water.
-
Energy Saving Design-- The unit will
cycle on and off with varied load demands. No hot gas bypass.
-
Closed loop system eliminates contamination
of the water system by recycling the water in a contaminant free flow path.
-
The Water Pump is bronze or stainless
steel, and contaminate free.
-
Utilizes environmentally friendly R-22
refrigerant.
-
Ethylene glycol is not required for
normal operating conditions. The unit will NOT be damaged due to an accidental
freeze up.
-
Uses a world-renowned TecumsehTM
compressor.
-
The Condenser is designed to allow full
capacity at higher temperatures.
-
Energy Saving Design which does not
use hot gas bypass.
-
Epoxy polyester powder coat finish is
highly durable and environmentally responsible.
-
Time proven Schreiber Engineering name,
and record of Superior Quality. In business since 1958.
-
Tested and approved by
ETL
Testing Laboratories, Inc.
Note about the Tonage
Ratings:
The TrueTonTM
label assures that every Schreiber Chiller meets or exceeds its stated
BTU performance as measured by the American
Refrigeration Institute standard testing methods. Be careful, since
not all chiller manufacturers test to the same standards.
Key to chiller components:
-
Dial Thermometer
-
Temperature Controller
-
Pilot Lights for the Compressor and Pump
-
Switches for the Compressor and water pump
-
Power Disconnect
-
Chilled Water Return -- 1" N.P.T.
-
Water Level Sight Glass
-
Water reservoir tank fill -- 1/2" N.P.T
-
Chilled Water Discharge -- 1" N.P.T.
-
Access Door
-
Pump Rotation Check
-
16" Condenser Fan
New:
The 5 ton unit features Electronic Controls
with a digital Display. |
 |
Chiller Specifications:
| Model Number: |
200
AC |
300
AC |
400
AC |
500 AC |
| Capacity: |
2 Ton |
3 Tons |
4 Tons |
5 Tons |
| BTU Per Hour: |
24,000 BTU/hr |
36,000 BTU/hr |
48,000 BTU/hr |
60,000 BTU/hr |
| Fluid Reservoir Capacity: |
45 Gallons |
| Fluid Circulating Pump: |
1 HP |
2 HP |
| Pump Specifications: |
30 GPM at 38 psi |
40 GPM at 44.8 psi |
| Voltage: |
230/3 or 460/3 |
| Amperage: |
18.0 - 9.0 |
18.0 - 9.0 |
20.6 - 12.5 |
27.0 - 14.0 |
Cabinet Size:
(W x D x H) |
30.25 x 46 x 42.25 inches |
| Weight: |
675 lbs. |
700 lbs. |
800 lbs. |
825 lbs. |
Caution:
Do not overcharge this, or any, refrigeration system.
The refrigeration sight glass is only an indicator of coolant being in
the system. The sight glass should never be filled when charging the system,
and will always be fuzzy. Overcharging the system will damage the compressor.